-40%
Monoprice HDBaseT Extender Kit 100m (328ft) HDMI Network IR Transmitter Receiver
$ 68.63
- Description
- Size Guide
Description
Used Kit, everything was fully tested.Bought this for 299$.
What you see in the pictures that's what you get.
You can check on youtube how the guy set it up, very easy. "youtube.com/watch?v=VJtIq6y5wtc"
If you have any question let me know.
Note: Maryland buyer will be charged State sale tax 6%.
Extend your HDMI audio/video signal to distances up to 328 feet using a single Cat6 cable with this HDBaseT Extender from Monoprice!
This Extender uses a new technology, which allows for a full bandwidth 10.2Gbps data throughput over a single Cat5e or Cat6 cable. The full 10.2Gbps bandwidth means that it supports all High Speed HDMI functions, including all HDMI 3D video modes, the extended 4K cinema resolution, 32-bit Deep Color, and high-definition compressed lossless audio, such as DTS-HD Master Audio and Dolby TrueHD.
The extender features a built-in, bidirectional infrared (IR) signal extender, which allows you to remotely control devices at the source or destination end of the connection. For example, normal operation would allow control of the source blu-ray player from the remote TV location.
Additionally, the extender is capable of transmitting a full-duplex 100Mbps local area network connection alongside the HDMI and IR signals. Each extender unit has two RJ45 LAN jacks. As long as one of the four jacks is connected to the network, the other three will propagate the network connection. This allows you to wire another room for HDMI video, IR remote control repeating, and full internet access, using only a single Cat6 cable!
Note:
While this extender will function using unshielded Cat5e cabling, we recommend the use of shielded Cat6 cabling for greater reliability over longer distances. Also note that any cable run through the walls must be rated for in-wall installations.
Features:
* Extends HDMI signals up to 328 feet (100 meters) using a single Cat6 cable
* Extends 100Base-TX network connectivity along with the HDMI video
* Can be daisy chained up to six units deep
* Built-in bidirectional IR repeater
* Supports all High Speed HDMI functions, including 3D video
This HDBaseT device is fully compatible with these other HDBaseT extender products from Monoprice:
* PID 10224 HDBaseT Wall Plate Extender
* PID 10226 HDBaseT 4x2 HDMI Matrix Switch
* PID 10227 HDBaseT Receiver
* PID 10228 HDBaseT Wall Receiver
Included in the Package:
* 1x HDMI extender transmitter (Tx)
* 1x HDMI extender receiver (Rx)
* 2x AC adapter (5VDC/2A)
* 1x IR transmitter bulb
* 1x IR receiver bulb
* 1x User's manual
Specifications
Details
Supported Video
High Speed HDMI with HDCP 1.2
Supported Resolutions
1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Color Support
up to 12-bit/channel Deep Color (36-bit total)
Audio Support
LPCM, Dolby AC3, DTS 7.1, DSD
Bandwidth/Data Throughput
up to 10.2Gbps
Operating Temperature Range
+5 ~ +131ᄚF (-15 ~ +55ᄚC)
Operating Humidity Range
5 ~ 90% RH (no condensation)
Return Policy
First and foremost, if you do not agree to all the terms and conditions of this return policy, you should not bid/buy my item(s)!
You can
return
the item for any reason if you
pay for return shipping
. After we have received the return and test it, we will issue refund if the item is DOA or has significant defect. If the item is fully functional we may charge
restoking fee
.
Restocking fee
of
15%
may apply if the return is for buyer’s
mistake
,
change mind
,
incompatible
or
no longer needed
.
Restocking fee
of
20%
will be charged customers that opens a
New Sealed
item and try to return for any other reason beside DOA.
From
5%
to
20% restocking fee
will be charge the Customer that returns an item on the basis of product not meeting Customers expectation beyond the stated performance of the product.
Restocking fee
of
25%
may apply for any returned products which have been subjected to improper handling/shipping as a result of
Customer Abuse
,
Negligence
,
Unauthorized
repair and/or installation, or any
Customer Induced Damage
(knowingly or not) such as:
Ø
Bent/Broken Socket Pins
Ø
Damaged PCB, Resistors, Capacitors, Inductors, or Small Passive Components
Ø
Burned or Missing Components
All returned products must contain the original
Manufacturer's Labels
. Products without such labels
will not be
accepted for returns.
Customer must include
Complete Accessories
, manuals, and the original packaging in resealable conditions for accepted returns, if something is missing we may charge fee for it.
We
will not accept
returns
after
30 days
of received item.