AIRLIVE TURBO-G WT-2000 USB DRIVER DOWNLOAD

Page 20 to bytes. When a profile is activated, the card will be initially connected to the profile. Table Of Contents 3. Select the number of the radio channel used for the networking. The Cisco AP can perform monitoring measurements through the Measurements CCX-compliant clients on the non-serving channels when this parameter is enabled. Introduction Thank you for purchasing the

Uploader: Bazuru
Date Added: 3 December 2004
File Size: 58.48 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 9955
Price: Free* [*Free Regsitration Required]

This card enables higher data throughput than the IEEE This option enables you to view the statistic information of the connection including transmit statistics and receive statistics. When a profile is activated, the card will be initially connected to the profile.

AirLive WT-2000PCI Turbo-G Wireless PCI Adapter Windows XP, Vista, Win7 Drivers & Utility

The channel setting should be the same with the network you are connecting to. By pressing ‘print’ button you will print only current page. Select the number of the radio channel used for the networking. To print the manual completely, please, download it.

Comments to this Manuals Your Name. This bar shows the signal strength level. This indicator helps to find the proper position of the wireless device for quality network operation.

  DELL BROADCOM NETXTREME II BASE DRIVER DOWNLOAD

The Cisco AP can perform monitoring measurements through the Measurements CCX-compliant clients on the non-serving channels when this parameter is enabled. Mode enables higher throughput than IEEE Profile This sign indicates the activated profile is not been connecting.

AIRLIVE WT USB USER MANUAL Pdf Download.

Configure The Profile 3. Page 36 If a receiver is not tuned to the right frequency, a spread —spectrum dt-2000 looks like background noise.

When the card is connected to the AP or Router with WMM function, you can enable the function of the card by following the steps below. The package should include the following items: Advance This option enables you to view the statistic information of the connection including transmit statistics and receive statistics. Turbo–g This option enables you to configure more advanced settings, for example: Password The password used for authentication. The system starts to install the software of the card.

AIRLIVE WT-2000 USB User Manual

When the card is connecting to the Routers or APs with the proprietary Turbo Mode wwt-2000, the Turbo Mode will be enabled automatically without any configuration. Page 20 to bytes. Page 35 Even if one or more bits in the chip are damaged during transmission, statistical techniques embedded in the radio can turbbo-g the original data without-the need for retransmission. Got it, continue to print.

  DELL D830 SCSI DRIVER DOWNLOAD

Secure the antenna to the antenna connector of the card. Add to Profile Button Add the selected network to Profiles list.

Download AirLive TURBO-G Wireless Utility

Table of Contents Add to my manuals Add. Page 22 For example: Table Of Contents 3. Turn on the computer. To an unintended receiver, DSSS appears as low power wideband noise and is rejected ignored by most narrowband receivers. This sign indicates the activated profile is not tw-2000 connecting.

Link Status This bar shows the signal strength level. Enter text from picture: Installation Procedure Secure the antenna to the antenna connector of the card.